ESP32 Complete Project : Wi-Fi-connected weather station using the ESP32

The ESP32 is a powerful microcontroller with built-in Wi-Fi and Bluetooth capabilities, making it an excellent choice for IoT projects. Let's create a sample project where we build a Wi-Fi-connected weather station using the ESP32, which will display temperature and humidity readings from a DHT22 sensor and send the data to an online dashboard. (ESP 32)

---

Microcontrollers 123 reads 0 comments Print

Creating an Arduino-based home automation system

Creating an Arduino-based home automation system can be a rewarding project. Below, I will provide a simple example of home automation code using Arduino. This setup will control a few basic appliances like a light, fan, and other devices through a relay module using sensors and a Bluetooth module. 

---

Microcontrollers 104 reads 0 comments Print

Controlling an Arduino with JavaScript - node js

Controlling an **Arduino with JavaScript** can be done using **Node.js** on your computer as an intermediary. By setting up communication between your computer and the Arduino, you can write JavaScript code to interact with the board. Here’s a step-by-step guide to get you started:

---

Microcontrollers 23 reads 0 comments Print

Automating tasks with Arduino

Automating tasks with Arduino

---

Robotics 286 reads 0 comments Print

Latest robotics programming languages in the industry

latest robotics programming languages in the industry

---

Robotics 330 reads 0 comments Print

example of a RAPID program for an ABB robot

Programming ABB robots involves using the RobotStudio software and the RAPID programming language. Below is a simple example of a RAPID program for an ABB robot. Please note that this is a basic illustration, and the specifics may vary depending on the robot model, its configuration, and the task at hand.

---

Robotics 660 reads 0 comments Print

Interfacing an Arduino with an ABB robot

Interfacing an Arduino with an ABB robot typically involves communication between the two devices. The ABB robot is often programmed using the RAPID programming language, and you can use an Arduino to send and receive data to and from the robot controller. Below is a basic example to illustrate the concept:

---

Robotics 428 reads 0 comments Print

Integrating an ABB robot with Flutter

Integrating an ABB robot with Flutter involves creating a communication interface between the Flutter application and the ABB robot controller.

---

Robotics 217 reads 0 comments Print

A few key points about Siemens robotics:

A few key points about Siemens robotics:

---

Robotics 193 reads 0 comments Print

ABB RobotStudio Example Program:

A simple example using RobotStudio, ABB's simulation and offline programming software. This example will demonstrate how to create a simple program for an ABB robot.

---

Robotics 213 reads 0 comments Print

Creating a path-following program for an ABB robot

Creating a path-following program for an ABB robot involves using the robot's programming language, which is typically ABB's Rapid programming language.

---

Robotics 203 reads 0 comments Print

examples of ai powered industrial robots

Examples of ai powered industrial robots

---

Robotics 216 reads 0 comments Print

Robotic arm control project using Flutter

Creating a robotic arm control project using Flutter can be a fascinating way to combine hardware and software. Flutter's cross-platform capabilities make it an excellent choice for building user interfaces that can communicate with a robotic arm, allowing you to control it from both Android and iOS devices.

---

Robotics 90 reads 0 comments Print

Training robots using artificial intelligence (AI)

Training robots using artificial intelligence (AI) involves creating models that enable robots to perform specific tasks autonomously. This can range from simple tasks like object recognition to complex behaviors like navigation and manipulation in dynamic environments. Below, I’ll walk you through a sample project that demonstrates AI training for a robotic arm to perform a pick-and-place task.

---

Robotics 124 reads 0 comments Print

KUKA robots program using KRL (Sample programming)

This sample program could be used to make the robot move between a few points in space. You can modify the positions and parameters like velocity and tool offsets to adapt it to your specific application.

---

Robotics 54 reads 0 comments Print